Pallets of Gen 5 3.0L Whipples IN STOCK

[Taxinator]

We received a few pallets of some fresh Whipple 3.0L units. We have a ton of these blowers IN STOCK and ready to ship at www.HHPRacing.com !

When will these get CARB approved? I heard they are working on it, but that was long ago.

 

[Jack_Toepfer]

Worth putting one of these on a 5.7?

 

[HighHorseman]

When will these get CARB approved? I heard they are working on it, but that was long ago.

Hoping soon for our west coast friends. Nothing we've caught wind of any specifics quite yet though.

Worth putting one of these on a 5.7?

For sure. We'd still expect to easily see another 150+HP as a safe setup on a 5.7 vehicle with some fuel system upgrades.

 

[MikeD1]

We'd still expect to easily see another 150+HP as a safe setup on a 5.7 vehicle with some fuel system upgrades.

Do you have a package of supporting mods for the 5.7 ? CAI, t-stat, plugs, exhaust etc.

 

[16GoManGoHC2]

Mine’s on

 

[16GoManGoHC2]

BTW, the Throttle Body (TB) adapter that comes with it may take up to a 108mm TB that has the same bolt on pattern as the stock 92mm unit but the adapter has only a 92mm inlet in it as it comes. If you want to go with a bigger TB your left to modify it on your own.

 

[HighHorseman]

Do you have a package of supporting mods for the 5.7 ? CAI, t-stat, plugs, exhaust etc.

We'll normally configure each package a la carte depending on the build specifics. The general run down is injectors, drop-in fuel pump and the blower itself. If you'd like to get a parts package put together feel free to shoot our sales team an email with your info! [email protected]

 

[The Englishman]

Mine’s on

View attachment 80367 View attachment 80368

That looks sweet ,was it a plug and play or did you need a tune?

 

[Demonic Cat]

Needed some small tune tweaks so far which were quickly handled (in like 15 minutes of contact) by my tuner @jonx96 of Moored Performance (HIGHLY RECOMMEND, can’t beat the price or response time)

https://www.mooredperformance.com/

Waiting on proper blower belt which should be here today, the 7 rib temporary belt I used for sizing from autozone just not cutting it lol, starts to slip after about 3500 rpm, it’s too long to get good tension from the tensioner snd 30% to narrow.
View attachment 80444

Cant wait for the results. As usual you and speedy do great work covering builds and mods with good detail as they progress. Pioneering early on helps everyone and offers more and new options to consider for a build. Access to CNC machine in the hands of a gear heads goes a long way for results as well. Thanks for sharing. When I am ready this route or liquid corn fuel will be considered. Why not both. I agree with benchmarking the result against same stock boost presser and will be a direct measurement of efficiency against stock IHI for performance gains.

 

[16GoManGoHC2]

Better belt,


first 3-4 hit netted this




Pulled like hell up top, can feel the difference no doubt

 

[AeroF16]

Better belt,
View attachment 80733

first 3-4 hit netted this


View attachment 80734 View attachment 80735

Pulled like hell up top, can feel the difference no doubt

It was probably just that downhill slope…

 

[16GoManGoHC2]

It was probably just that downhill slope…

same place as this 2 weeks ago





Look at the time gains up too

 

[16GoManGoHC2]

Here’s Draggy 60-130 times over the last 2/3 weeks. That’s with a 2.4 IHI with a 2.72 up top and +10 ATI lower with a billet inlet plate, ported snout, and 105 mm TB, ie it’s at its MAX !!!


Compare 8/18 to today, almost exact same weather conditions temp and DA on the same bridge, 1/2 second gain, about 1/10 gained every 10 mph. And best of all??? It whines (ie SCREAMS) about just as much as the IHI did but hopefully will last much longer. Happy with the upgrade and purchase. 👍👍

 

[Taxinator]

Here’s Draggy 60-130 times over the last 2/3 weeks. That’s with a 2.4 IHI with a 2.72 up top and +10 ATI lower with a billet inlet plate, ported snout, and 105 mm TB, ie it’s at its MAX !!!
View attachment 80745 View attachment 80746

Compare 8/18 to today, almost exact same weather conditions temp and DA on the same bridge, 1/2 second gain, about 1/10 gained every 10 mph. And best of all??? It whines (ie SCREAMS) about just as much as the IHI did but hopefully will last much longer. Happy with the upgrade and purchase. 👍👍

May I introduce you to this software:
https://en.wikipedia.org/wiki/Microsoft_Excel

😁

 

[16GoManGoHC2]

May I introduce you to this software:
https://en.wikipedia.org/wiki/Microsoft_Excel

😁

Leave it to a tax man to suggest a spread sheet lol 😂
I see enough computer entry crap at work lol, and requests from my boss for a spread sheet on everything including toilet paper usage and who’s picking their nose and not washing their hands afterwards lol. I prefer my relaxing tablet and paper but thank you for the suggestion.

 

[vortecd]

Leave it to a tax man to suggest a spread sheet lol 😂
I see enough computer entry crap at work lol, and requests from my boss for a spread sheet on everything including toilet paper usage and who’s picking their nose and not washing their hands afterwards lol. I prefer my relaxing tablet and paper but thank you for the suggestion.

we have "to do" at work to keep track of things. I use it for at home stuff also like grocery shopping and car to dos. We get a weekly email about it and he even said sometime you need to disconnect from the electronics and write things down

 

[The Englishman]

We call it a list 🤓

 

[16GoManGoHC2]

We call it a list 🤓

I call it something else lol

 

[vortecd]

We call it a list 🤓

it is an app "to do" I have it on phone. My boss brings me up all the time how I really got into using it. I even told him I did, for home stuff

 

[Boris]

Leave it to a tax man to suggest a spread sheet lol 😂
I see enough computer entry crap at work lol, and requests from my boss for a spread sheet on everything including toilet paper usage and who’s picking their nose and not washing their hands afterwards lol. I prefer my relaxing tablet and paper but thank you for the suggestion.

We accountants live or die with Excel