How much tire is to much tire

[Chuck]

As the title states is my question

 

[1971demon]

As the title states is my question

Fitment issues..generally dictate how much is too much

 

[BULL]

As the title states is my question

Purely size based question? This has been our battle since the HC/RE came out, what tire/wheel combination can fit without undue rubbing and/or mods...

Does a dead-blow to the rear inner wheel well bother you? Drilling holes and moving plastic rivets work OK in your mind?

How about how far out past body edges?

Phillips Flares ok?

All of these questions equate to different sizes.

 

[Deano]

Even going to maximum fitmet, it is not enough.

 

[1971demon]

Purely size based question? This has been our battle since the HC/RE came out, what tire/wheel combination can fit without undue rubbing and/or mods...

Does a dead-blow to the rear inner wheel well bother you? Drilling holes and moving plastic rivets work OK in your mind?

How about how far out past body edges?

Phillips Flares ok?

All of these questions equate to different sizes.

And

Purely size based question? This has been our battle since the HC/RE came out, what tire/wheel combination can fit without undue rubbing and/or mods...

Does a dead-blow to the rear inner wheel well bother you? Drilling holes and moving plastic rivets work OK in your mind?

How about how far out past body edges?

Phillips Flares ok?

All of these questions equate to different sizes.

would never take a drill...hammer..or any cutting tool to my cars...EVER

 

[BULL]

Even going to maximum fitmet, it is not enough.

Agreed, unless you are only doing moderate GT driving in a canyon, then O.E. is enough.

 

[BULL]

And

would never take a drill...hammer..or any cutting tool to my cars...EVER

Exactly my point, for you ~295 is about the limit, for others on the other end of the spectrum, 325, or even 345 has been shoved in the hole, but it's a VERY different mentality.

 

[1971demon]

And

would never take a drill...hammer..or any cutting tool to my cars...EVER

the Phillips flares...and 1/4 in. spacers..(I dont race.. spacers are fine)..work awesome for my triumph oversize rims and tires..look great..and fit great..

 

[1971demon]

the Phillips flares...and 1/4 in. spacers..(I dont race.. spacers are fine)..work awesome for my triumph oversize rims and tires..look great..and fit great..

Got nitto DR's out back...can't tell ya what size...(you would think I should know)

 

[1971demon]

Got nitto DR's out back...can't tell ya what size...(you would think I should know)

Well ya made me go out to the man cave and check the sizes...(nitto p315's)...I remember when ordering the triumph wheels..we had a discussion bout offset...it's not stock..(there still 20's)...but a deep dish that looks spectacular...

 

[B5Cat16]

315 35 20 on the back of my Challenger with a very thin spacer. Clearance is perfect and therefore that was the perfect tire for my car.

 

[1971demon]

315 35 20 on the back of my Challenger with a very thin spacer. Clearance is perfect and therefore that was the perfect tire for my car.

Same set up I run on my HC...and with the Phillips flares...it looks killer