• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Dodge, Jeep and RAM Forum dedicated to FCA owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the SRT Forum today!


Ported snout with 2.85 or 2.72 alone

Member ID
#1611
Messages
39
Reactions
58
Likes
12
City
Arlington
State
TX
Country
United States
Vehicle
2019 Challenger Hellcat
#1
I'm curious if anyone has experience putting these two combos up against each other. I'm considering either doing a snout port with the 2.85 and a 105MM TB or doing just the 2.72

If the snout port with the TB and 2.85 can match or exceed a 2.72 only in power, I'd rather spend the extra money to spin the blower a little slower to reduce heat generation
 


Hpindy

4000 Posts Club
Founding Member
9 Second Best E/T
HFCOTM
Member ID
#974
Messages
4,869
Reactions
11,001
Likes
302
City
Jackson's Point
State
Non-US
Country
Canada
Vehicle
2018 challenger hellcat
#2
I'm curious if anyone has experience putting these two combos up against each other. I'm considering either doing a snout port with the 2.85 and a 105MM TB or doing just the 2.72

If the snout port with the TB and 2.85 can match or exceed a 2.72 only in power, I'd rather spend the extra money to spin the blower a little slower to reduce heat generation
That would be an interesting Comparison.

Sent from my BBF100-2 using Tapatalk
 


Blkout

500 Posts Club
Founding Member
Donating Member
Member ID
#1095
Messages
852
Reactions
1,380
Likes
132
City
Warner Robins
State
GA
Country
United States
Vehicle
2016 Challenger Hellcat
#3

16GoManGoHC2

3000 Posts Club
Founding Member
9 Second Best E/T
Member ID
#1139
Messages
3,288
Reactions
7,769
Likes
252
City
Nanticoke
State
PA
Country
United States
Vehicle
2016 Challenger He’ll Cat
#4
But that was with a ported or billet inlet plate as well correct? I think OP is just talking ported snout and a 105 TB
 


Blkout

500 Posts Club
Founding Member
Donating Member
Member ID
#1095
Messages
852
Reactions
1,380
Likes
132
City
Warner Robins
State
GA
Country
United States
Vehicle
2016 Challenger Hellcat
#5
But that was with a ported or billet inlet plate as well correct? I think OP is just talking ported snout and a 105 TB
I provided the link so he can read. I also used a 100mm TB instead of 105mm. It's the closest comparison he's going to get I think.
 




Top