How-To: Rebuild Front Two Piece Rotors.

[BULL]

The torque info I used was supplied by DBA. 13 Nm = 115 inch/lb or 9.5 ft/lb.

Somewhere in my collection of tq values I have one that's actually a "tq to xx value and then turn xx degrees", like a torque to yield type bolt!

 

[MiHiHemi]

Somewhere in my collection of tq values I have one that's actually a "tq to xx value and then turn xx degrees", like a torque to yield type bolt!

Pretty sure they don’t need that much attention. Only looking for a nice consistent torque all around I think.

 

[BULL]

Personally, I use 120lb-in on H-bobbins, and 60lb-in on D-bobbins (10lb-ft & 5lb-ft)

I also think it's important to use a 1/4" drive tq wrench too, with good technique.

 

[Diboblo]

Happen to have a link by chance?

Looked for it yesterday, but came up empty....

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mMN7ZPG

Sent from my SM-G955U using Tapatalk

 

[McLovin]

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mMN7ZPG

Sent from my SM-G955U using Tapatalk

Awesome. Thank you!

 

[BULL]

Awesome. Thank you!

Not considering the source, that's far better than I can produce them for.

 

[McLovin]

Not considering the source, that's far better than I can produce them for.

Yeah....had to grit my teeth a bit....

 

[Db & Nugs]

Just more shot from chi-na nobody has an American source for the brembo floating bolts do they? Would gladly pay a few bucks more to keep my money in US....

 

[Diboblo]

Just more shot from chi-na nobody has an American source for the brembo floating bolts do they? Would gladly pay a few bucks more to keep my money in US....

Nope. Not yet.

Brembo used to sell them, direct. No longer available.

I mean... I get it. Totally.

Keep is posted, if you find a legit stateside supplier.

Sent from my SM-G955U using Tapatalk

 

[BULL]

Nope. Not yet.

Brembo used to sell them, direct. No longer available.

I mean... I get it. Totally.

Keep is posted, if you find a legit stateside supplier.

Sent from my SM-G955U using Tapatalk

They still will, but only as a repair item, they also will only sell a limited amount to each person.

I'm not sure what they're charging or what the quantity limit is.

 

[Diboblo]

Went through my bookmarks:

Note: No "U" tension springs:

https://racingbrake.com/ml1/

No telling where these were made.

Sent from my SM-G955U using Tapatalk

 

[BULL]

Went through my bookmarks:

Note: No "U" tension springs:

https://racingbrake.com/ml1/

With "U" tension spring:

https://racingbrake.com/ccm-10/

No telling where these were made.

Sent from my SM-G955U using Tapatalk

I don't think that second link is the HC set, it would seem that the H-bobbin has a REALLY long neck on it????

 

[Diboblo]

I don't think that second link is the HC set, it would seem that the H-bobbin has a REALLY long neck on it????

Right.

Fixed that...

Sent from my SM-G955U using Tapatalk

 

[Db & Nugs]

Interesting. My nuts are the other way around...and no jokes guys

View attachment 46736

Hey @MiHiHemi I love those rotors and have been looking for them for my DD. I had a member from DD.net give me a pair of the front aluminum hats now I'm looking for the rotors. Any chance you have a model number or part number. I'm putting them on a 2021 DD tow n go which has the brombo big brake package just came with 1 piece rotors originally.

 

[MiHiHemi]

Hey @MiHiHemi I love those rotors and have been looking for them for my DD. I had a member from DD.net give me a pair of the front aluminum hats now I'm looking for the rotors. Any chance you have a model number or part number. I'm putting them on a 2021 DD tow n go which has the brombo big brake package just came with 1 piece rotors originally.

Here’s all I have handy...

 

[Db & Nugs]

Here’s all I have handy...

View attachment 83610

Thank you for the info

 

[Wizza]

new hardware is available from www.knsbrakes as well which is what I used recently when installing the DBA T3 5000 rings to my front hats

 

[Diboblo]

Hardware here, too:

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mKXoxJ6

Sent from my SM-G666 using Tapatalk

 

[Hcat1st]

Hardware here, too:

US $95.00 | Jekit high performance car brake parts full floating bolts for-brembo floating center cap with disc for global car model
https://a.aliexpress.com/_mKXoxJ6

Sent from my SM-G666 using Tapatalk

This link no longer works.. would you happen to know what exactly you typed in to search for those crimp nuts? Or maybe you know of another vendor that sells the hardware for the hats?