ZL1 Products

ofdfiremedic · Feb 24, 2020

Can anyone give any insight on how their ZL1 products have held up? I am currently debating the whole kit for the Hellcat: Splitter Extension, Side Skirts, and Rear Extensions, paired with a Diffuser. I'm definitely torn on the rear extensions as I kind of like them but also think they are excessive. My other question has to do with splitter rods, 8" vs 10"? Anything bigger seems pointless to me, I'm not looking for a drastic angle on them, but I don't want them to have to be completely vertical. Any pics or pro/con information welcome! Thanks for reading!

Slows2k · Feb 24, 2020

I wish the side splitter brackets were black instead of raw aluminum.

SNeal5966 · Feb 24, 2020

I have their deluxe rock guards, and they are very nice.....so I would assume the rest of their products are also.

Phizzle · Feb 24, 2020

Check out Kng_wraps on Instagram. They also have a website. I follow them and their product looks legit and different than what's out there. I'll probably pick up a diffuser and rear spats from them next month. They have a 15% discount right now.

I have ZL1 rock guards installed, probably 6 months or so by now. Seems to be holding up fine and doing its job. Kinda wished that it was a bit bigger for more coverage, especially now that I have 305's in the rear. Also, ZL1 products are pretty expensive for what they are. Deters me personally.

ofdfiremedic · Feb 25, 2020

Phizzle said:

I will have to check them out, thanks! Their shipping on ZL1 seems like a problem to me, over priced for sure, small part, $50, whole pile of large parts, $50.

trancein · Jun 16, 2020

I have side skirts, front splitters, rods, rock guards and rear extension side skirts, no issues at all with any of them

ofdfiremedic · Jun 17, 2020

trancein said:

Beautiful car, what brand lift is that in the garage?

Heminized · Jun 17, 2020

@ofdfiremedic
I went with the Diffuser, but I recommend getting black hardware versus the the silver they send you.

Confuzed1 · Jun 17, 2020

I have their ZL1 rock guards, side skirts and chin spoiler protectors. They seem to do what they say. Their products are pricey for what they are....but so is pretty much everyone offering parts for our cars.....kinda comes with the territory I guess.

All their parts are pretty much made out of ABS plastic and aluminum and are sturdy.

trancein · Jun 17, 2020

this is the only place I know that makes the side skirts and splitters in real carbon fiber, my rear side skirts are from this place and quality is really good.
https://www.familycustomsaf.com/shop/dodge-challenger/3

trancein · Jun 17, 2020

SNeal5966 · Jun 19, 2020

I have the deluxe rock guards for my challenger from ZL1 Addons. I am having an issue with the tape on the front pair not sticking to the plastic. It sticks to the car just fine but not the plastic of the rock guards.

I have reached out to ZL1 Addons, not much help though they did send me some more tape but barely enough. I used 90% Isopropyl alcohol to clean the surfaces really good before re-applying, have tried twice. I have reached out to ZL1 Addons since the tape just doesn't stick to the plastic. They so far have yet to really offer any help.

Anyone else having this problem?? Is there a chance I have something defective? The only other thing is that the material is flat, and you bend it to push it into the tape but its like a spring. I thought about putting the heat gun to it maybe if it weren't trying to spring back straight it would stick better? I really wish ZL1 would get back to me again.....For the price I am pretty annoyed.

trancein · Jun 19, 2020

I bought my own 3m tape and I put it on part where the gaurd will be sticking to, then I clipped them with their clips

SNeal5966 · Jun 19, 2020

trancein said:

Clips???? I don't recall receiving any clips.....maybe that's my problem. Mine only has tape.

Old Mopar Guy · Jun 19, 2020

I believe there should be some rivets to secure them into existing holes. Tape alone is not going to do it.

SNeal5966 · Jun 19, 2020

Old Mopar Guy said:

I am talking about the front pair. The bolts that go into the plastic nutserts are there, look at the tape strip from the holes up on the fronts. On the challenger there are no rivets in the tape section.....that's what I am talking about

Paladin06 · Jun 19, 2020

I have their side skirts and rear skirts on my Hellcat. I added a Dodge bade to side skirts on the Hellcat.

CB463C21-CAEB-4842-862F-AF9FE99561A2~2.jpeg

868574A7-2F1E-419C-89B8-2253B1A2EF11~2.jpeg

Honestly I don’t like the rear skirts. They actually tilt upward and look strange to me.

I have the side skirts and rock guards on my Redeye and love the look. I did add Redeye SC badge to side skirts on the Redeye. Subtle by nice.

Paladin06 · Jun 19, 2020

Paladin06 said:

I have their side skirts and rear skirts on my Hellcat. I added a Dodge bade to side skirts on the Hellcat.
View attachment 18959 View attachment 18960 View attachment 18961 View attachment 18962 View attachment 18963 View attachment 18964 View attachment 18965
Honestly I don’t like the rear skirts. They actually tilt upward and look strange to me.

I have the side skirts and rock guards on my Redeye and love the look. I did add Redeye SC badge to side skirts on the Redeye. Subtle by nice.

Help @Hunter . Can you flip my pics plz?

Paladin06 · Jun 19, 2020

SNeal5966 said:

I have the deluxe rock guards for my challenger from ZL1 Addons. I am having an issue with the tape on the front pair not sticking to the plastic. It sticks to the car just fine but not the plastic of the rock guards.

I have reached out to ZL1 Addons, not much help though they did send me some more tape but barely enough. I used 90% Isopropyl alcohol to clean the surfaces really good before re-applying, have tried twice. I have reached out to ZL1 Addons since the tape just doesn't stick to the plastic. They so far have yet to really offer any help.

Anyone else having this problem?? Is there a chance I have something defective? The only other thing is that the material is flat, and you bend it to push it into the tape but its like a spring. I thought about putting the heat gun to it maybe if it weren't trying to spring back straight it would stick better? I really wish ZL1 would get back to me again.....For the price I am pretty annoyed.

Always clean both surfaces throughly with alcohol. 3M adhesion pads really help with any double back tape application.

SNeal5966 · Jun 19, 2020

Paladin06 said:

I did all of that.......

Sign Up! To view all forums and unlock additional cool features

ZL1 Products

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

500 Posts Club

Active Member

Active Member

Active Member

Active Member

Active Member

2000 Posts Club

Active Member

4000 Posts Club

4000 Posts Club

4000 Posts Club

Active Member

Share This Page